Amd Msi Motherboard
 |
US $114.00
How to overclock your card.
Graphics card or GPU is the component for the procurement of computer graphics. IGP onboard graphics or found on board except For the high-end board. These days, graphics chip embedded in CPU die itself is sufficient for these IGPs. Customs, basic office applications such as surfing and even High-definition video playback. More than anything, but this requires a discrete graphics card, the more power has to do with requirements such as for games.
As for CPUs, GPUs with clock frequency. They are the main CPU (both ATI and Nvidia), frequency-shader (the Nvidia card) and memory. By increasing the clock speed, can the Performance of the card.
New on the BIOS.
As with the CPU, graphics card can. overclocked via the BIOS and software, even if the BIOS. Overclocking is for the CPU is not reliable, although the event of a change GPUs. achieve GPU BIOS with a tool like Nibitor possible overclocking with many Risks. Flashing GPU in most of the situation. It is not fixed and may even brick. GPU and make it useless, while changing the voltage. For this reason I will stay away from the description. BIOS overclocking the GPU.
New Software GPU.
This is the most reliable method of overclocking Your card. A variety of tools such as overclocking the card. Rivatuner, After Burner, ATITool, etc., but I found the MSI Afterburner respect Rivatuner is the simplest and most natural.
Once installed, you will see and move, separate. To increase the core voltage, core speed. Shader clock, memory clock and fan speed. For both ATI and Nvidia cards, you may want to add to the main clock. 10MHz increments for each check you warrant to MSI Kombuster Furmark or 10 minutes invite, please note that to create these programs are far more applications in the real world or a game. Reported that they have, and that leading to much heat produced. Ensure sufficient cooling if your evening after-sales staff can keep the temperature increase and the chances of overclocking higher
Once you get to the point where it is impossible to also occur. 10MHz and reduce the stress test run for two hours. If a card a stable maximum overclock you can find to reach you. If the card does not reduce the fixed 10MHz and run tests, the safety again. Do it until you have a certain stability to achieve.
If you have an Nvidia card should be overclocking. Shader Clock afterburnet the establishment of a new core clock, starting from the factory and move the slider. Shader Clock 10MHz increase in Afterburner and follow the steps described above. Once you get a stable rate, you choose your maximum and frequency. Shader Core and check security. If not, increase the steady decline of the Shader Clock 10MHz and / or core GPU Clock and stability.
Overclocking. Graphics memory.
As with the main Shader Clock and you can overclock the memory. After Burner, and a new slider and memory speed. The same steps for overclocking the memory for maximum security. If you are all set. - Shader Clock and memory on a value that you just found and stress test again, if cards are not fixed; You can reduce the main memory or the clock. Shader to achieve a stable overclock.
Comparison
If you want to see if there is any difference in performance or overclocking. You can be sure that used in the comparison. 3-D as a test version of 3DMark 06 and 3DMark Vantage can You download. Fraps and install the application on frames per second displayed in the game is to see the difference in the game.
Note.
Please note that overclocking increases power consumption and heat generation. Every time before a better job of cooling overclocking. Even if your Power supply. (PSU) for the increased load. Power supplies may be lower than the standard blow off other components. Others with them. Then guarantee. Most providers do not offer warranty card, if your card has, which was damaged by overclocking. The good news is that the chances of masonry Your card is much less. Please note that I said nothing. Tweaking core voltage is supported by most of the cards. Voltage tweaking, even if your card supports, so you do not. Overvoltages your card.
About the Author
For more on GPU and Phenom II CPU overclocking, please visit http://mytechencounters.wordpress.com
What is my motherboard. K9N6PGM2 MSI V2?
Hi, I just bought a new motherboard. MSI, and I can not be installed. Windows XP on it, I 20GB formatted my hard drive. And for some reason not to read on the second floor of my DVD drive. But when I put on my 40GB. It reads DVD-drive, dual hard drive. Layer, and when I tried to install. Windows open its HELPPPPP .. PLEASE! This is my V2. MSI K9N6PGM2 Specs AMD 2 or 1GB RAM Atholon.
It can occur due to faulty Cable. IDE (if the drive does not like to use, connect to SATA hard drive and DVD drive cable. Same IDE). Is this the reason, then simply change the Line and try to change it, if not resolved to your mother a card for the warranty. Duration: ..)
MSI 790FX-GD70 Motherboard
NVIDIA SLI Licensed for Intel Sandy Bridge Motherboards
Intel's Sandy Bridge series of processors is almost here and with that comes a new motherboard platform. We all know AMD Crossfire will work on it, but what about NVIDIA SLI? Well, NVIDIA just announced today that its SLI technology has been licensed by leading motherboard manufacturers for use on Intel P67 Express motherboards . The P67 Express boards will be necessary for the Sandy Bridge ...
No comments yet.
Leave a comment