Ddr3 2gb 12800
 |
US $20.00
Overclocking Q9550 on EP45 - UD3P.
I have upgraded my computer's configuration. I bought Gigabyte EP45 - UD3P and Intel Core 2 Q9550, 2GB Corsair DDR3 12 800 and ANTEC 500W Power Plus I add a card. NVIDIA 9600GT, two hard drives and two drive. Know that this is the clock of the processor. Do you think the original 2.83 GHz 3.83 GHz is possible with Zalman coolers like those who take the time to thank respond to new overclocking.
Overclocking. Q9550 and EP45 - UD3P.
Your Q9550 should be able to open. H24 4 GHz, with me PE ~ 4GHz stable with 1.42V vcore. From, OCCT is 2.0 30 minutes after heat I am a different story. 70 degrees on axis with NHU12F I plan to go somewhere else with this motherboard. If you have sufficient ventilation in your outfit, then You may not have much trouble. PSU is also good in the same meaning.
Overclocking. Q9550 and EP45 - UD3P.
After reinstalling the entire system, I left. OC my Q9550, but not for the vcore. 1.27v degrees of temperature. Significantly decreased. 30 ° idle and 46 ~ 50 degrees below 2.0 to 3.4 Ghz OCCT test of 15 minutes, I sure do not. Sure, I'd like to test this weekend will be. Close It is up to 4 GHz with vcore <1.4 or even possible. 3.4 GHz to 1.27 vcore 1.37v is I received a message from the study is limited. CPU and the PC in this voltage after the test. OCCT and 3DMark06.
href = "http://install-how.blogspot.com/2010/05/overclocking-q9550-on-ep45-ud3p.html> Q9550 overclock on EP45 - UD3P.
It is a good thing. The system supports up Overclocking Q9450 3.8GHz DDR3 DDR2 Otherwise clapping in cold weather. Coef of 8.5 with the Q9550 should not too hard to get there. I plan to match. Motherboard GPU support I currently have the ability to use my new processor. It does not have be upgraded to support overclocking be.
Q9550 processor, as I do not really to scale. FSB, I was little more than 460th FSB with Q9550 ES vcore 1.35V at 1.33v pcprobe demonstrated issued a warning. SuperPi crashes on 32 MB 460 * 8.5 How can I publish. Written on the basis of the best I can do this. I spended much time on this. Then the temperature is acceptable. 39 ° to 0 in the primary use and temperature. 55 degrees maximum support and positive temperature coefficient. Axis
Hi need, do not try. Vcore of origin were PMC. Increase to 1.28 Vcore than the processor is not damaged. I'm up to 3.6 without increasing Vcore. Although it still makes sense. (O app / c), even at temperatures I know that the choice finally. Noctua frequency of 3.8 GHz Quad NHU12P for did not transpire bad. But the fact that quads are special Co., FSB.
About the Author
Overclocking Q9550 on EP45-UD3P
Why do I have to say that the "No signal"?
I finished building my new computer and when I turn ensure that "no Signal. Check graphics card works fine with this on my old motherboard and create new development includes all the components work earlier. PLUS 3 new Components is their ASUS motherboard. P7H55 PRO - M, Intel i5 760 CPU 2.8 GHz, 4GB RAM OCZ 2GBx2 DDR3 - 1600 DDR3 - 12800 desktop, I do not understand what the problem is. It was the Main Board or not. Driver problem? I have an old program that is installed. Hard drive for a motherboard before. Motherboard is not compatible with the display or both incompatible with the graphics card. : I have a new P7H55 - M PRO ASUS motherboard. I5 760 with Intel CPU 2.8 GHz Hard Drive Hitachi 500GB HD Cooler Master GX 650 watts. DIAMOND ATI Radeon 5850 GPU PSUU memory 1GB OCZ Gold 4GB x2 2GB DDR3 - 1600 DDR3 - 12800 RAM Desktop ViewSonic. The highest resolution 23.6 "1920x1080.
"No Signal" is a sign of good advice I guess. This means that it might not have been reviewed. Check graphics card is seated properly, it is connected to receiving a cable is correct?
BuytV, Episode 101, Crucial 2GB kit BAllistix DDR3 PC3-12800
No comments yet.
Leave a comment