Infineon Memory Ram
![]() |
BeeProg Universal Programmer is a function of how
BeeProg Universal Programmer.
A short description..
33 901 is supports - 2.42 version of the device on the software. (September 13, 2007).
- Extremely fast programming, one of the fastest programmers in this category. Program 16 - Mbit Flash memory less than 18 seconds.
- 48 - Stand pindrivers effective. Adapter for the device required. DIL is not.
Connect the programming process. (ISP) -.
- Connection to partner with PC: USB or parallel port (printer).
- USB 2.0/1.1 compatible interface.
- High-speed IEEE 1284 (ECP / EPP) printer-port interface. (LPT).
- Convenient and easy-to-use controls. 95/98/Me/NT/2000/XP/2003/XPx64 Windows compatibility.
- Multi-Programming. Possible by attaching more to write a computer program.
Warranty - - 3 years.
Specification
Hardware
Base unit DACs.
- Port USB 2.0.
- FPGA based IEEE 1284 Slave to the printer port. 1 MB / s transfer rate.
- Intelligence Board. : Microprocessor performance and the state. FPGA machine.
- Sam fall D / A converters for VCCP, VPP1 VPP2 and more control over time and
- The VCCP 0..8V/1A.
- VPP1 the VPP2 0..26V/1A.
Auto calibration -.
Self-test capability -.
- ESD and surge protection to connected to a power source, the parallel port.
ZIF Socket, pin drivers.
Pin 48 - (. Zero Insertion Force) DIL ZIF socket for devices. 300 / 600 million baht to 48 - pin
Pin drivers: - 48 international
--VCCP/VPP1/VPP2. Can be connected to the pins.
- The perfect place for every pin.
- TTL FPGA to drive the H, L, CLK, pull up pull down all the pins. Pin-driver.
- Pin-driver level selected analog output. 1.8V to 26V.
- Currently limited to close Current, power failure shut down.
- Prevention. ESD in each leg of the socket (IEC1000 - 4 -. 2: Air 15kV, Contact 8kV).
- Test continuity. : Each leg was tested. Before running a program.
Connect your Internet Service Provider.
- Category Men 10 - missinsertion pole with locking.
- 5 pin driver. to draw TTL, H, L, CLK, back down; Choose from a high level. 1.8V to 5V device management. (Including low voltage). All
- 1x VCCP voltage (Range.End 2V..7V/100mA) is on pins 1, apply third
Chip voltage applications. (VCCP) with both source and sink capability. / And a sense voltage.
- 1x VPP voltage (range 2V..25V/50mA) be applied to the legs. 2,3,4,6,8,10.
Goal - pressure system (the offer 2V..6V/250mA.).
Support Equipment
Into the socket. ZIF Programmer.
- EPROM: NMOS / CMOS, 2708 * set 27xxx and 27Cxxx 8 / 16 bit data width of the full support for LV series.
- EEPROM: NMOS / CMOS, 28xxx, 28Cxxx, 27EExxx series with 8 / 16 bit data width.
- Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx - Series from 256Kbit to. 32Mbit, with 8 / 16 bit data width of the full support for LV series.
Serial E (E) PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060 putting MDAxxx, full support for LV series.
- Configuration (EE) PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx AT17xxx, 37LVxx.
- 1 E - Wire (E) PROM: DS1xxx, DS2xxx.
- PROM: AMD, Harris, Philips, National. / Signetics Tesla, TI.
NV RAM: - DSxxx Dallas, SGS / Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx set, ZMD U63x.
- PLD: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE Altera.
- PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA. ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx.
- PLD: Xilinx. : XC9500, XC9500XL, XC9500XV, XPLA3 CoolRunner, CoolRunner - II
- Other PLD: SPLD / CPLD series: AMI, Atmel, AMD - Vantis, Gould. Cypress, ICT, Lattice, NS, Philips, STM, VLSI,. TI.
- Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49, 87x50 series
- Microcontroller series 51st 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx all manufacturers, Philips set. LPC.
- Microcontrollers Intel 196 series: 87C196 KB / KC / KD / KT / KR / ...
AT90Sxxxx, ATtiny,: Atmel AVR microcontroller - ATmega series.
Cypress Microcontrollers -: CY8Cxxxxx.
Elan Microcontrollers -: EM78Pxxx.
- Set Microcontrollers MDT 1xxx. And 2xxx.
- Microchip PIC Microcontrollers: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx share, dsPIC.
- Motorola. Microcontroller (Freescale): 68HC05, 68HC08, 68HC11 series
- Microcontroller MTV2xx Myson, 3xx, 4xx, and 5xx series
- Microcontrollers National: Set COP8xxx.
Set uPD78Fxxx: microcontroller. NEC -.
- Microcontrollers Scenix (Ubicom): Sxxxx Series
- Microcontrollers SGS - Thomson: ST6xx, ST7xx putting ST10xx.
- Microcontrollers TI: MSP430 and set MSC121x.
- Microcontrollers ZILOG: Z86/Z89xxx and set Z8xxx.
- Microcontrollers other: microelectronics. EM, Fujitsu, Goal Semiconductor. Hitachi, Holtek, Princeton, Macronix Winbond, INFINEON (Siemens), Toshiba, Samsung, ...
Programmer. By Connections, Internet service provider.
- Serial E (E) PROM: IIC series, MW accessory set, SPI, KEELOQ set, the data series. Flash, PLD configuration memories.
- Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny putting ATmega.
Cypress microcontroller -: CY8C2xxxx.
- Elan. Microcontrollers: EM78Pxxx putting EM6xxx.
: EM Microelectronics. Microcontrollers - 4 and 8 bit series
- Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx. PIC18xxx share, dsPIC.
- Motorola Microcontrollers / Freescale: HC11 set, HC908 series (both 5 cable, all - wire).
Set uPD7xxx: Microcontrollers NEC -.
- Philips Microcontrollers: Set LPC2xxx, set LPC, 89xxx share.
- Microcontrollers Scenix (Ubicom): Sxxxx Series
- Microcontrollers TI: MSP430 (both JTAG and BSL share), a set MSC12xxx.
- PLD: Lattice: ispGAL22xV10x, ispLSI1xxxEA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL. M4-xx/xx, M4LV-xx/xx, M4A3-xx/xx, M4A5-xx/xx, LC4xxxB/C/V/ZC.
- International PLD (by the Players. JAM supports JTAG /).
Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, MAX II
XC9500XL. XC9500, XC9500XV, XPLA3 CoolRunner, CoolRunner - II: Xilinx.
More. Details please visit. http://iautotool.com/beeprog-universal-programmer-p-120.html.
href = "http://iautotool.com/eprom-programmer-and-adapters-c-8.html>. IAutotool.com, car diagnostic tools professional online shop wholesale official website. From IAutotool, Inc., a leading manufacturer of automated tools from Shenzhen China We are specialized in high OBD Diagnostics. Professional Tools Code Scanner, ECU Chip Tunning Tool Key Programmer Auto Airbag Reset sets, measure distances and editing suite. Other.
Each is expected to be good products for what he / she already paid for. Quality is always one of the concerns of the largest buyers before they buy. The high-quality car engines to our solemn Obligation. Only good products are not enough. Excellent technique. It also supports a focus on the buyer. IAutotool has completed the sale of cars, the basic tools and a wealth of experience in solving problems that it be possible to find a buyer to be paid. Each item will be Iautotool from control by the team sent. QA tasks before packing. Check the performance of all. Image taken from a list of real-time. The best description. It may be the credibility . Feel
About the Author
IAutotool.com, a professional car diagnostic tools wholesale online store, is the official site of IAutotool, Co.,Ltd, a leading auto tools manufacturer from Shenzhen China. We specialize in high quality OBD Tools, Professional Diagnostic Tools, Code Scanners, ECU Chip Tunning Tool, Auto Key Programmers, Airbag Reset Kits, Odometer Correction Kits and so on.
Everyone expects to get good product for what he/she paid, So quality is always one of buyer's biggest concern prior to buying. Only providing qualified Car Tools is our solemn promise. Just good products are not enough. Excellent technical support is also vital to buyers. IAutotool has been dedicated to Car tools sales since foundation, and has rich experience in solving possible problems buyer may encounter. Each item shipped out from Iautotool are carefully checked by a responsible QA team before packing. They will check the performance of every function. Real pictures taken from the items are the best explanation. So you can feel reliability here.
Questions about the type of RAM.
I looked around and found very much I have a HP Pavilion zd8124ea with 512 MB RAM 2 x 256 DDR2 - SDRAM INFINEON PC2 - 3200 (20MHz) SODIMM.i a 2-channel memory. I can actually order up to 4 GB of RAM (2GB. Each person in the bus) before I watch a bit wide. 64 (do not know what it It means?). Effectively 200MHz Clock: 800MHz band more. 6400mb / s Memory Bus: Bus: DDR2 SDRAM. Dual ect .................. North Bridge Properties. Speed supported FSB: FSB 533 800 (? Explain please) Can be supported memory type. DDR - 333, 400 DDR2 - 400, 533, the maximum amount of memory. : Not Supported ECC 4GB I guess that means I can. Using DDR2 - 400 and 533, or can I use. DDR2 - 667 and 800 Shine says FSB 533 and 800? And the bus, I only 800MHz on the memory card or in general. (In 2 x 400 MHz?) Tanx I know that this is a strange question.
Watch actual clock rate. This is in line with FSB RAM (DDR2 - Working 400th 200MHz) to your RAM is running at high speed. (DDR2 - 533 to 266MHz is running) will match up to the clock speed. FSB so it really does not make sense to buy it. Other numbers look inconsistent, only accept. But that may be because I have been awake at the time. 22 hours without caffeine. I pick up and it says to use. DDR2 - 400 (5-12 Sites are below.) So I'll go with that if I was. They detail and. (From the original document on your laptop, do not print a copy of your browser.) A professional, if you think I'm wrong. Hope this helps EDIT: Maybe a lot less tired than I thought. Sorry, the following links. : Http: / / h10032.www1.hp.com/ctg/Manual/c00291986.pdf.
FS C550 instaling NEW Infineon HYB25L512160AC 7 5 RAM

Memory startup readies conductive-bridging RAM
Adesto Technologies Corp.-a memory startup funded by Applied Materials Inc. and others-is readying its first product-a conductive-bridging RAM (CBRAM). At a recent Non Volatile Memory Conference in the USA, the company said it is readying a 1-megabit serial interface flash/EEPROM device.



US $16.39



























































No comments yet.
Leave a comment